Select your langauge:

G series forced cooling fan for YVP motor

Location: Index > Products

Brief introduction

G-series forced cooling fan is comprised fan cover, fan blade, motor and bracket, standard fan cover is made of steel plate which stretching by oil hydraulic press, long-length cover is welding forming by rolling steel plate, air inlet is composed by 8 X 8 holes. The motor adopts special design, the level of protection is IP55.This series of fan is easy for installation, with low noise, small vibration ,reliable performance. Various cooling fans with different size and purpose can be provided, and made to measure service is also available.


G-series forcerd cooling fan is comprised of fan casing,fan blade,motor and bracket,fan’s standard casing is made of steel plate which stretching by oil hydraulic press,Long-length casing is made of roiling steel plate after welding, air inlet of shield with reseau of size:8 x 8mm.Adopting special design on motor,our fan’s protection class can reach IP55 while with low noise,little vibration,reliable operation and simple installation.

Voltage and frequency

Rated frequency: 50HZ 、 60HZ
Rated voltage : Single phase 110V、220V、380V
Three phase: 110V、220V、380V、415V、660V、1140V

Operating limits

Max altitude : 1000M
Temperature : -15℃ - +40°C
Relative humidity:≤90%
Duty type: S1
Protection Class : IP54 or IP55


Power supply : independent
Make sure the rotating direction as the same as fan direction arrow
Be careful to avoid collisions and knocking during transport,free from acid alkali fumes.
product should be stored in a clean,cool place free from acid and alkali fumes,temperature is -10℃~+35°℃、Relative humidity ≤70%

The warranty period

Within two years from delivery date,Mingtong will replace or repair the problem fan for free(damage caused by incorrect operation can't be acceptable)

Standard type (A type)

Overall & installation dimensions